The components of custom ordered underfloor heating systems

The Pipe comes in two diameters: 12 and 16mm. The 12mm pipe is the real 'ceiling height saver'. The 16mm pipe is generally used only in projects bigger than 80m² since a thicker diameter allows for longer circuits.

The 'Thin panel'is available in thicknesses of 12.5 and 16.5mm (generally referred to as 'Thin12' and 'Thin16' respectively). This is as thin as it gets!

The 'EasyPanel' is available in total thicknesses of 18 and 25mm for the 12mm pipe, and 25mm for the 16mm pipe.

Our different pumps and mixing units:

The FS36
A small pump and mixing unit designed for floors of up to 36 m². Comes complete with manifold.

The FS160
Specially designed for floors of up to 160m².

The Flowbox
Specifically for floors larger than 160m². We can provide this pump with all floor sizes where the client specifies an Automix unit to auto-manage the system.

The Automix
The Automix unit makes fully automatic adjustments to the temperature of a system, in order to compensate inside for any changes in the air temperature on the outside of a building. The Automix is only compatible with the Flowbox.

Wireless wall thermostats (usually one per room) as well as actuators and programmable receiver units are also included in the system.

We also supply the bending units (which guide the pipe from the floor up to the manifold) and the pipe fittings that connect the pipe circuits to the manifold, as well as panel glue and aluminium tape, etc. In short, everything you’ll need!

Now, click here to get a quotation!

Alternatively, , click here to see the technical specifications of the system.